Complete Protection Strips Kit – Optimist

Description

The Optimist kit is a complete set designed by Fernando Alegre to reduce wear, friction, and potential failure.

 Specifications and Applications

 UHMWPE strips with acrylic adhesive on the backing:

 – 2 translucent strips, 500 microns (20 mil) thick, 25 mm (1″) wide, 380 mm (15″) long for the bottom of the centerboard

 – 2 translucent strips, 250 microns (10 mil) thick, 25 mm (1″) wide, 380 mm (15″) long for the bottom of the centerboard case

 – 2 black strips, 250 microns (10 mil) thick, 20 mm (4/5″) wide, 270 mm (12″) long for the upper centerboard case

 – 1 translucent strip, 125 microns (5 mil) thick, 40 mm (8/5″) wide, 740 mm (27.5″) long for the boat/rudder corners

 PTFE strips with silicone adhesive on the backing

 – 2 gray strips, 50 microns (2 mil) thick, 50 mm (2″) wide, 150 mm (6″) long for the mast base

 – 2 light gray strips, 250 microns (10 mil) thick, 60 mm (2.36″) wide, 150 mm (6″) long for the sprit

 – 2 light gray strips, 50 microns (2 mil) thick, 40 mm (4/5″) wide, 100 mm (4″) long for friction between the mast and the sprit

 – 2 light gray strips, 50 microns (2 mil) thick, 40 mm (4/5″) wide, 80 mm (3 1/5″) long for friction between the sprit block and the mast

 PTFE tape with silicone adhesive, linerless:

 – 1 roll, 50 microns (2 mil) thick, 50 mm (2″) wide, 10 m (11 yds) long for the rigging

 PTFE disc for adjusting the mast step height from 1 mm to 7.5 mm

 -2 disques de 1mm

 -1 disque de 1.5mm

 -2 disques de 2mm

 Black rubber

 – 4 short pieces to lock the centerboard

 – 2 short pieces to lock the centerboard

 Packaging

 In transparent PET with eurohole and barcode